-- card: 7828 from stack: in
-- bmap block id: 0
-- flags: 0000
-- background id: 2658
-- name: Section 241


-- part 3 (button)
-- low flags: 00
-- high flags: 4000
-- rect: left=310 top=77 right=94 bottom=464
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: 


-- part 4 (button)
-- low flags: 00
-- high flags: 4000
-- rect: left=344 top=208 right=224 bottom=432
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: 


-- part 5 (button)
-- low flags: 00
-- high flags: 4000
-- rect: left=377 top=248 right=260 bottom=432
-- title width / last selected line: 0
-- icon id / first selected line: 0 / 0
-- text alignment: 1
-- font id: 0
-- text size: 12
-- style flags: 0
-- line height: 16
-- part name: 


-- part contents for background part 13
----- text -----
Plugging it together

-- part contents for background part 28
----- text -----
Introduction
Setting up the BBS
Running the BBS
BBS Internals
Appendices

-- part contents for background part 29
----- text -----
Overview
1a: Hardware Pieces
1b: Software Pieces
2: Assembly
3: Customizing

-- part contents for background part 30
----- text -----
Hardware
Folders
Stacks
Local Check-out
Tweaks
Remote Check-out

-- part contents for background part 12
----- text -----


Before we can do anything with HyperBBS itself, we must set up the hardware, and make sure that it's working properly. I suggest following this check-list:

1. Set up the Macintosh and disk.
2. Verify that you can run HyperCard.
3. Hook up the modem to the Mac and to
     the phone line.
4. Verify that it works: call another
     BBS using a terminal program.

By making sure that the hardware works first, you'll make life a lot simpler if you run into problems with the set-up process later; you won't have to wonder which step screwed up.